1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

blades and blanks for sale

Discussion in 'Makers Market' started by Fieldcrafter-uk, Oct 25, 2013.

  1. Fieldcrafter-uk

    Joined:
    Jun 25, 2013
    Messages:
    282
    Likes Received:
    1
    Location:
    Nottinghamshire
    Fieldcrafter-uk

    The Fieldcrafter-UK hand crafted full tang sheath knife is made for field sportsman, by a field sportsman, designed to excel in the field at any task big or small. Built to last, strong enough to cope with almost anything!!

    The blade is 5.8mm thick o1 tool steel.
    Professionally heat treated in Sheffield to a tested hrc 57-59
    Laser engraved in Sheffield.
    Hand finished in every other way, each one is subtly different.
    9.5cm cutting edge
    12.5cm handle
    it takes 4 x 4mm pins and 1x8mm lanyard.
    There are 3 choices of handle material available for the Fieldcrafter, black canvas micarta , green canvas micarta and black and green laminate g10.

    The Micarta handle is held in place with a 2 ton rated epoxy, 4 brass pins and a brass lanyard tube. Handle and blade are satin finished.

    The sheath: made from dyed black 3.5mm shoulder leather. Hand stitched with 4 strands of waxed nylon thread with a deep welt edge. Riveted belt loop and the leather waxed.

    £120 each with free (uk only) first class recorded delivery.

    website www.fieldcrafter-uk.co.uk
    review here http://www.bushcraft...rafter-uk-knife



    we accept Paypal, cash or direct bank transfers for payment.

    [​IMG]
    [​IMG]
    [​IMG]


    also there is the new knife I have just had 100 cut and heat treated .

    they are made of 4.5mm ol tool steel professionally heat treated to tested 57-59 hrc

    the same grind and Finnish as the larger fieldcrafter but this is designed to be at the cheaper end of the market to help folks on a budget .

    they are not laser marked with a logo yet so they are as cheap as possible.


    I only have two as finished knives at the moment , one in green micarta and one in g10, there is as you van see left and right handed sheaths for these.

    pirce for the finished knives is £65 that includes free uk first class recorded delivery.

    they are 19cm long with aprox 8cm or 3" cutting edge.



    [​IMG]

    [​IMG]




    and as always there's the option to buy a finished blank with pins and lanyard for £27 that included first class recorded delivery to.

    I have 100 of these so not gonna run out !!


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]






    and of course the big Damascus bowie with sheath for £250 including delivery .


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #1 Fieldcrafter-uk, Oct 25, 2013
    Last edited: Dec 20, 2013
  2. Stew

    Stew Bushcrafter through and through

    Joined:
    Nov 29, 2003
    Messages:
    5,160
    Likes Received:
    302
    Location:
    Aylesbury
    I'll take a blank please Matt - pm me your paypal address again. :)
     
  3. Hibrion

    Hibrion Maker

    Joined:
    Jan 11, 2012
    Messages:
    1,231
    Likes Received:
    3
    Location:
    Ireland
    I like the look of those £27 blanks. What size are the pin and lanyard holes?
     
  4. drliamski

    drliamski Full Member

    Joined:
    Sep 11, 2006
    Messages:
    821
    Likes Received:
    0
    Location:
    East London
    Could you do a blank with a full flat grind?

    Sent from my Nexus 7 using Tapatalk
     
  5. Chainsaw

    Chainsaw Native

    Joined:
    Jul 23, 2007
    Messages:
    1,282
    Likes Received:
    49
    Location:
    Central Scotland
    Couple of blanks please, can you PM me your pp address.

    Thanks,

    Alan
     
  6. Fieldcrafter-uk

    Joined:
    Jun 25, 2013
    Messages:
    282
    Likes Received:
    1
    Location:
    Nottinghamshire
    that's great thanks gents , the pins and lanyard are 4mm and 8mm but the holes are .5mm bigger to allow for scale growth after HT.

    I cant offer flat grinds on them no sorry , I did experiment with it but its to heavy on abrasives .

    at this price they have to be efficient and cost effective to make .

    I have very limited internet access for now so I think its best I just provide paypal details here and ask you guys to make sure to add a note to the payment to confirm your postal details are correct and what it is your paying for .

    paypal linda.simmons53@btinternet.com

    all the best , matt .
     
  7. Jjessup

    Jjessup Full Member

    Joined:
    May 15, 2013
    Messages:
    190
    Likes Received:
    0
    Location:
    Essex
    Payment sent for a blank, looking forward to it.
     
  8. Fieldcrafter-uk

    Joined:
    Jun 25, 2013
    Messages:
    282
    Likes Received:
    1
    Location:
    Nottinghamshire
    Thank you for the payments gents , received and will be on there way Monday !!

    Thank you !

    All the best , matt
     
  9. Chainsaw

    Chainsaw Native

    Joined:
    Jul 23, 2007
    Messages:
    1,282
    Likes Received:
    49
    Location:
    Central Scotland
    Payment sent for two.

    Cheers,

    Alan
     
  10. Fieldcrafter-uk

    Joined:
    Jun 25, 2013
    Messages:
    282
    Likes Received:
    1
    Location:
    Nottinghamshire
    Hi guys just an update .

    10 blanks in the post this morning , along with the Damascus which has finally sold !
    And the g10 handled knife in the new shape !

    On my Facebook page there are blanks finished by customers in cherry and other hard woods .
    Please post pics I do enjoy seeing them completed .

    All the best , matt
     
  11. Jjessup

    Jjessup Full Member

    Joined:
    May 15, 2013
    Messages:
    190
    Likes Received:
    0
    Location:
    Essex
    Hi Matt,

    My blank arrived this morning. It looks great. Once i've got myself some liners and time I'll try handling it with a bit of Osage Orange, should make a nice change.

    Thanks again

    john
     
  12. Chainsaw

    Chainsaw Native

    Joined:
    Jul 23, 2007
    Messages:
    1,282
    Likes Received:
    49
    Location:
    Central Scotland
    Got my two today. Got some some homemade denim micarta in mind for them...

    Cheers

    Alan
     
  13. Bluebs4

    Bluebs4 Full Member

    Joined:
    Aug 12, 2011
    Messages:
    814
    Likes Received:
    7
    Location:
    Bristol
    Mine come yesterday great deal already started to clad them .
     
  14. Animal17

    Joined:
    Oct 26, 2013
    Messages:
    2
    Likes Received:
    0
    Location:
    Sutton coldfield
    Payment sent for 4 Blanks
     
  15. Animal17

    Joined:
    Oct 26, 2013
    Messages:
    2
    Likes Received:
    0
    Location:
    Sutton coldfield
    got Mine today brilliant thanks
     
  16. Demonwolf444

    Demonwolf444 Tenderfoot

    Joined:
    May 18, 2013
    Messages:
    82
    Likes Received:
    0
    Location:
    Ripon, North Yorkshire
    payment send for 2x blade blanks and pins with thanks.
     
  17. Demonwolf444

    Demonwolf444 Tenderfoot

    Joined:
    May 18, 2013
    Messages:
    82
    Likes Received:
    0
    Location:
    Ripon, North Yorkshire
    received today. Excellent quality.
     
  18. Pikebite

    Pikebite Tenderfoot

    Joined:
    Jun 11, 2007
    Messages:
    64
    Likes Received:
    0
    Location:
    Generally on British Blades
    I have been trying to contact you. Please see your PM's
     
  19. Demonwolf444

    Demonwolf444 Tenderfoot

    Joined:
    May 18, 2013
    Messages:
    82
    Likes Received:
    0
    Location:
    Ripon, North Yorkshire
    This is why the lack of replies to PM's i am guessing. I placed an order it arrived quickly and the blade blanks were excellent quality just finishing up the sheath today turned out a really cracking bit of kit.
     
  20. onfire

    onfire Forager

    Joined:
    Oct 3, 2009
    Messages:
    210
    Likes Received:
    0
    Location:
    Brecon Beacons
    I wonder if he has any more blanks still for sale?

    For those who have bought, how finished is the 'finished blank with pins'? Is it shaped, bevelled, heat treated and ready for final sharpening or does it need heat treating before handling?

    Thanks, Tim
     

Share This Page