Flint and Steel fire lighting kits (Dragon's Breath) for sale

  • Hey Guest, Early bird pricing on the Summer Moot (29th July - 10th August) available until April 6th, we'd love you to come. PLEASE CLICK HERE to early bird price and get more information.

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 9 sets available
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 7 sets available
 

Bigrich

Full Member
Jan 26, 2011
272
0
Malvern
Yes Please John,

If you could PM me with what I need to do to pay because I don't think you do paypal,

Thanks very much

Richard
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 5 sets available - I had better be getting some more made!

I just started cooking some more charcloth....
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 17 sets available
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 13 sets available!
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 11 sets available!
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 9 sets available!
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 12 sets available![!
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 2 sets available!
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 2 sets available - made some more since the Moot :)
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 2 sets available - made some more since the Moot :) and will have them at the RC meet :)
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
An ideal Xmas przzie!
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits

DragonsBreath.jpg

Sorry - photobucket ate the picture - I will put a new one up soon!

These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 2 sets available - made some more since the Moot :)
 

John Fenna

Lifetime Member & Maker
Oct 7, 2006
23,109
2,843
66
Pembrokeshire
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
DSCF5933.jpg

Typical set - sizes and shapes vary .

DragonsBreath.jpg


These are proving very popular! And going fast!
So I made some more....

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £10 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

New stock just made!
Now only 2 sets available
 

BCUK Shop

We have a a number of knives, T-Shirts and other items for sale.

SHOP HERE